A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
-
Loosen the drive pinion nut. The counterhold tool (3028) must be supported on the adapter ( T10235) - arrow -.
- A - 3 bolts M 8 x 25
- B - 32 mm socket
- C - toggle
-
Secure the puller (VW 391) using the 2 bolts M 8 x 25 - arrows -.
-
Remove the flange/driveshaft.
-
Remove shaft seal.
-
Clean the threads on the drive pinion.
-
Coat outer edge of the seal with axle oil.