audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Relays and Modules - Transmission and Drivetrain > < Selector Lever Handle and Transmission Range Display Unit Assembly Overview|Page 5768
Page 1
background image

Manual Transmission/Transaxle: Technical Service Bulletins
M/T - Hard To Select 1st Gear When Transmission Is Cold

34 First gear sporadically difficult to select

34 11 03 

2019844/2 

February 14, 2011. 

Supersedes Technical Service Bulletin Group 34 number 09 - 01 dated January 23, 2009 for reasons listed below.

AFFECTED VEHICLES

CONDITION 
First gear is sporadically difficult to select in cold operating conditions.

TECHNICAL BACKGROUND

When the gearbox is cold, it can be difficult to engage first gear. This condition is normal during the break-in period because of increased drag torque;
this condition decreases with time. The stickiness is more pronounced with new, highly viscous oil.

If the gear changing is correct in warm condition, the condition is normal.

PRODUCTION SOLUTION 

Not applicable.

SERVICE

With vehicle stationary, engine not running and the clutch pressed, assess the gearshift. If all gears can be correctly selected, the external gearshift is
correctly adjusted. If this is the case, further repairs will not change/improve the concern.

Changing gearbox oil will not improve the condition.

WARRANTY INFORMATION 
This TSB is informational only and not applicable to any Audi warranty.

ADDITIONAL INFORMATION 

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.

Relays and Modules - Transmission and Drivetrain > < Selector Lever Handle and Transmission Range Display Unit Assembly Overview|Page 5768