A4 Quattro Sedan V6-2.8L (ACK) (1997)
Exterior Moulding / Trim: Service and Repair
Roof Joint Molding, Removing And Installing
-
Rear window cover strip removed
-
Pry out roof joint molding -1- from rear to front.
NOTE: Pry out roof joint molding carefully; do not damage paintwork.
-
Press seal -2- onto roof joint molding before installing. First press seal on at front and rear, then press on remainder by working toward middle.
-
Sealing lip -2- must face center of vehicle.
-
Seal -2- must not touch sealing seam -3-.
-
Position roof joint molding flush at front of roof and press into roof duct at rear.