A4 Quattro Sedan V6-2.8L (ACK) (1997)
![background image](/audi/a4_quattro_sedan/v6-2.8l_(ack)/Page-3066002.png)
-
Install brake pads in brake carrier (arrows).
CAUTION: The repair kit contains four self-locking hex bolts which must always be Installed.
-
Bolt on brake caliper housing.
Tightening torque: 35 Nm (26 ft. lbs.)
Note: Depress the brake pedal firmly several times while the car is stationary so that the brake pads adjust to their normal operating positions.
-
Install wheels and tighten wheel bolts.
Tightening torque: 120 Nm (89 ft. lbs.)
-
Check brake fluid level and top up if necessary.