A4 Quattro Sedan V6-2.8L (ACK) (1997)
-
Adjust clearance -A-, then tighten nut -4 -.
-
Dimension -A- = 0.1 to 0.5 mm (0.004 to 0.020 inch)
-
Tightening torque: 4 Nm (35 inch lbs.)
Pedal bracket with internal thread for brake light switch
1. Brake light switch
2. Hex nut, M12 x 1.5
-
Part No. N011 0208
3. Brake pedal
Note: Between the nut and the pedal bracket there is a spring clip (not shown), Part No. N0120424.
CAUTION: Part numbers are fisted here for reference only. Always check with your Parts supplier for the latest information.
-
Install brake light switch in pedal bracket.
-
Adjust clearance -A-, then tighten nut -2 -.
-
Dimension -A- = 0.1 to 0.5 mm (0.004 to 0.020 inch)
-
Tightening torque: 4.5 Nm (39 inch lbs.)
With spring clip for the brake light switch
1. Stop surface of brake pedal