A4 Quattro Sedan V6-2.8L (ACK) (1997)
![background image](/audi/a4_quattro_sedan/v6-2.8l_(ack)/Page-3471005.png)
-
Install damper ring so that end of spring coil is resting against stop of damper ring (arrow).
-
Install suspension strut mounting bracket.
-
Install securing bolt into suspension strut mounting bracket and screw on nut (arrow) loosely.
Note: Nut faces in direction of travel
-
Install locating bolt -A- into suspension strut mounting bracket and secure loosely with nut.
-
Turn suspension strut mounting bracket until pointer on degree scale (on VAG1752 suspension strut tensioner) is pointing to 21° ± 2° (with
locking bolt -D- loose) and
L - left-hand suspension strut
R - right-hand suspension strut
Note: Illustration shows the position of the degree scale when assembling the right-hand suspension strut.