A4 Quattro Sedan V6-2.8L (ACK) (1997)
-
Clip onto clutch pedal
9.
Clutch master cylinder
-
Removing and installing, See: Clutch Hydraulic System/Clutch Master Cylinder/Service and Repair
CAUTION: Do not operate after the clutch pedal has been removed
10. Socket head bolt
-
20 Nm (15 ft. lbs.)
11. Mount
-
Insert in mounting bracket with overcenter spring
12. Overcenter spring
-
Remove and install together with clutch pedal, See: Clutch Pedal and Over-Center Spring, Removing and Installing
13. Socket head bolt
-
5 Nm (44 inch lbs.)
-
Secures pivot pin for clutch and brake pedal.
14. Seal
15. Torx bolt
-
25 Nm (18 ft. lbs.)
-
Also secures brake master cylinder to brake servo