A4 Quattro Sedan V6-2.8L (ACK) (1997)
Windshield: Technical Service Bulletins
Airbag Label - Apply After Replacing Windshield
Group:
64
Number:
98-02
Date:
Feb. 6, 1998
File this Technical Bulletin in Repair Manual No: W42 014 195 108
Subject:
Airbag Label for Replacement Windshield
Model(s):
A4
m.y. 1996 ->
Windshield, removing and installing
CAUTION!
On replacement windshields, an airbag label must be installed on the passenger side.
Airbag label, applying
-
Using felt tip pen, mark outline of airbag label on outside of windshield according to specified dimensions.
^
Dimension -a-: 12 mm * 1 mm (approx. 15/32 in. * 1/32 in.)
^
Dimension -b-: 12 mm * 1 mm (approx. 15/32 in. * 1/32 in.)
^
Dimension -c-: 15 mm * 1 mm (approx. 19/32 in. * 1/32 in.)
-
Remove protective film and apply airbag label on passenger side as shown free of bubbles.
-
Remove marking from outside of windshield.
This Repair Manual information is new and will be integrated with the next Repair Manual update.