A4 Quattro Sedan V6-3.2L (BKH) (2005)
Axle Nut: Specifications
Note:
^
The wheels must not touch the ground when initially tightening the bolt securing the outer drive shaft joint; otherwise the wheel bearing can be
damaged.
For the next step a second mechanic is required.
-
1st mechanic gets into vehicle and presses brake pedal.
-
2nd mechanic tightens hex bolt for drive axle to initial torque.
Hex bolt (M14): 115 Nm
Hex bolt (M16): 200 Nm
-
Install wheel and lower vehicle to the ground.
-
Turn bolt securing drive axle an additional 180° (1/2 turn)
CAUTION: (Only turn the bolt through this additional angle when the vehicle is standing on wheels: risk of accident)