A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
Evaporator Case: Service and Repair
Evaporator Housing, Assembly
Evaporator Housing, Assembly
-
Remove heater/air conditioner assembly complete with instrument panel.
-
Heater/air conditioning assembly.
1
-
Intake duct
-
Removing and installing air flow flap
-
Coat sealing surfaces of housing halves with silicone rubber before assembling
2
-
Fresh/recirculating - air flap vacuum unit
3
-
Top part of evaporator housing
4
-
Gasket
-
Glued into top part of evaporator housing
5
-
Evaporator
6
-
Retaining clip
-
Carefully pry off with screwdriver
7
-
Intake ring
-
Secured from turning by cast stud on bottom half of housing
8
-
Bottom part of evaporator
-
Coat sealing surfaces to upper housing half with silicone rubber before assembling
9
-
Fresh air blower -V2-