A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
Tail Lamp: Service and Repair
Tail Lights, Removing and Installing
Tail Lights, Removing And Installing
Removing
-
Open trunk storage bin on proper side.
NOTE:
-
Better access to the right tail light can be obtained by removing the central locking system pump retaining strap and laying the pump in the trunk.
-
If a CD changer and/or a telephone transmitting/receiving unit is installed in the left storage bin it must be removed.
-
Disconnect harness connector -3-.
-
Remove nuts (4x) (arrows) 4 Nm (35 in. lb).
-
Remove entire light assembly toward outside.
Installing
-
Install in reverse order of removal.
-
Align tail light to adjacent body panels (equal gap clearances) before tightening nuts.
NOTE: When installing, make sure that the seal between the body and tail light housing is properly installed.