A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
Instrument Panel Control Module: Customer Interest
Instruments - Outside Temp. Not Shown On Display
90 08 11
2016014/2
November 6, 2008. Supersedes Technical Service Bulletin Group 90 number 07-06 dated August 23, 2007 for reasons listed below.
Vehicle Information
90 Missing outside temperature in IP cluster display
Condition
Outside temperature is missing in IP cluster driver information display.
Technical Background
The outside temperature display is disabled and must be activated in adaptation channel 19 of the dash panel insert.
Production Solution
Not applicable.
Service
1. Select Vehicle Self Diagnosis >> 17 - Dash Panel Insert >> 010 - Adaptation.
2. Change the second digit from the right in existing adaptation value 19 from XXX0X to XXX1X.
On new diagnosis tester variants, leading zeros are not shown. In this case, the following may apply:
-
Outside temperature display disabled: 0x or 0
-
Outside temperature display enabled: 1x or 10
Parts replacement is not permitted. Removed dash panel inserts for this reason will be re-debited.