A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
Suspension Strut / Shock Absorber: Service and Repair
Suspension Strut, Disassembling and Assembling
Disassembling And Assembling Suspension Strut
Note: Pay attention to the different components used in the various suspension versions (e.g. "Standard", "Sport" and "Heavy Duty" suspensions).
Disassembling
-
Clamp VAG1752/2 spring mounting tool in vise.
-
Install shock absorber into VAG 1752/2 spring mounting tool.
-
Use screwdriver to pry out cap, item -1-.
-
Place VAG1752/1 spring compressor onto coil spring.
WARNING: Make sure the coil spring is seated correctly in the VAG 175213 adapter (arrow).
-
Compress coil spring using VAG1752/1 spring compressor until upper spring retainer is free.
-
Remove self-locking nut from piston rod (counter hold using hex wrench).
-
Remove appropriate components.
Assembling