A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
-
Tighten line fitting -B- to clutch master cylinder to 15 Nm (11 ft. lbs.).
-
Slide hose -A- onto brake fluid reservoir up to stop.
-
Bleed hydraulic clutch system after installing clutch master cylinder, See: Service and Repair/5 Speed Manual Transmission 01A All Wheel
Drive/Clutch System, Bleeding
To install E-box in plenum chamber:
-
Always replace seal -C-.
-
Make sure seal is positioned properly, and does not cover opening or stepped metal edge.
-
Install E-box by hand and evenly tighten nuts -A- to 4 Nm (35 inch lbs.) (i.e. imprint on E-box cover).