A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
^
Self locking
^
Always replace
^
Threads for bolts in drive flanges must always be cleaned (e.g. with a thread tap)
6. Universal joint
^
Maximum permissible angle of deflection 25°
7. Shim
^
Determining thickness, Refer to Drive/Propeller Shaft, Adjustment
8. Hex bolt, 23 Nm
9. Driveshaft center mounting
10. Driveshaft
^
Adjusting, Refer to Drive/Propeller Shaft, Adjustment
11. Hex socket head bolt, 55 Nm
^
Self locking
^
Always replace
^
Threads for bolts in drive flanges must always be cleaned (e.g. with a thread tap)
12. Lock plate
13. Constant velocity joint
^
Maximum permissible angle of deflection 8°
14. Gasket
^
Always replace
^
Pull off backing foil, and stick self adhesive side of gasket to drive flange.
^
Remove grease from drive flange
15. Transmission