A4 Quattro Wagon L4-1.8L Turbo (AWM) (2001)
11
-
Microswitch
-
Only vehicles with anti-theft warning system
-
Removing and installing see Fig 1
12
-
Hinge arm
Fig. 1 Removing and installing microswitch
-
Remove mount for door handle -1-.
-
Carefully release locking tabs (arrows) and remove microswitch -3- upward.
-
Press back locking mechanism (arrow B) and slide harness connector up and out of mount.
-
Pull connecting cable out of seal -2-
-
When installing, be sure to press cable completely into seal as shown.
Fig. 2 Removing and installing seal for door handle
-
To remove, unclip seal and remove.
-
When installing, seal must be engaged completely in mount (arrows), otherwise it won't seal!