A4 Quattro Wagon L4-1.8L Turbo (AWM) (2001)
^
Ensure exhaust system is aligned stress free.
^
Tighten bolted connections on clamp evenly to 40 Nm.
Vehicles with all-wheel drive:
^
Cut exhaust pipe at right angles using body saw, e.g. V.A.G 1523 A, at position marked -arrow-.
WARNING! Wear protective goggles.
^
When installing, position clamp centrally over saw cut.
-
Installation position of clamp -1-: Horizontally, bolted connections face rear left wheel Refer to, Fig. 2
^
Ensure exhaust system is aligned stress free.
^
Tighten bolted connections on clamp evenly to 40 Nm.