A4 Quattro Wagon L4-1.8L Turbo (AWM) (2001)
Air Bag Control Module: Service and Repair
Airbag Control Module -J234-, Removing And Installing
-
Disconnect battery Ground (GND) strap.
-
Remove front center console.
-
Disconnect securing bracket at harness connector - 3 -.
-
Disconnect harness connector - 3 - from control module - 1 -.
-
Remove nuts - 2 - (3x).
Tightening torque: 6 Nm (53 in.lb)
-
Remove airbag control module -J234-.
NOTE: If the airbag control module is replaced, the new control module must be coded.