A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
Trunk / Liftgate Handle: Service and Repair
Handle Mechanism For Rear Lid, Removing And Installing
Removing
-
Remove lock cylinder for rear lid.
-
Disconnect inner electrical harness connector at grip piece.
-
Remove nuts (Qty. 4) - 1 - and - 2 - (different versions; mark for re-installation).
-
Tightening torque: 8 Nm
-
Press both catches - arrows - down and remove grip piece - 3 -.
Installing
Installation is performed in the reverse order of removal.