A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
1
-
Hook
2
-
Four-way lumbar support release
3
-
four-way lumbar support
4
-
Retaining pins
5
-
Idler pulley
6
-
Rivets (4x)
7
-
Four-way lumber support motors (Qty. 2)
-
Removal
-
Remove seat.
-
Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
-
Attach the front seat to the fixture for seat repair VAS 6136.
-
Remove backrest cover panel.
-
Remove connector - 8 -.
-
Drill out rivets - 6 - (2x).
-
Remove motor on opposite side the same way.
-
Disengage release for four-way lumber support height adjuster - 9 - at hook - 1 -.
-
Disengage four-way lumbar support adjustment release - 2 - at retaining pins - 4 - and at relay pulley - 5 -.
-
Remove four-way lumbar support motors - 7 - (Qty. 2).
-
Installing:
-
Install four-way lumbar support motors - 7 - in reverse order of removal.
8
-
Connector (Qty. 2)
9
-
Four-way lumbar support height adjuster release