A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
-
Remove seal.
-
To do so, use trim removal wedge 3409.
Note: When removing make sure that the surface of the cylinder is not damaged.
Installing
-
The surface of the piston and seal should be cleaned using methylated spirits and then dried.
-
Apply a thin coat of lithium grease G 052 150 A2 to piston and seal before inserting.
-
Insert inner seal in brake caliper housing groove using trim removal wedge 3409.
-
Press in protective cap with special tool - 1 - and - 2 -.
-
Item - 1 - Assembly tool for protective caps T10146/1
-
Item - 2 - Piston resetting tool T10145
Note: Use jaw protectors