A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
Note: To install the sealing flange with installed seal, use the guide sleeve T10053/1.
-
Fasten bolts in specified order:
-
Fasten bolts - 1 to 6 -.
-
Fasten bolts - 7 to 10 -.
-
Install crankshaft seal (belt pulley side).
-
Replace center bolt for toothed belt gear.
Note:
^
There must be no oil on the contact surface between the toothed belt gear and crankshaft.
^
Do not oil the bolt for crankshaft toothed belt gear.
-
Install crankshaft toothed belt gear -2- with new diamond disc -3- and new center bolt -1-.
-
Hold toothed belt crankshaft gear with Counter Support 3415 and tighten.
The rest of installation is in reverse order of removal. Note following:
How to install toothed belt and adjust valve timing
-
Install crankshaft belt pulley
-
Install ribbed belt.
-
Install lock carrier with attachments.