audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Fuel Pressure and Residual Pressure Before High Pressure Pump, Checking|Page 4046 > < Turbo Fuel Injection and Ignition|Page 4043
Page 1
background image

Fuel Pressure: Testing and Inspection
Fuel Pressure and Residual Pressure Before High Pressure Pump, Checking

Fuel Pressure And Residual Pressure Before High Pressure Pump, Checking

Special tools, testers and auxiliary items required

-

Fuel Injection Pressure Gauge Set V.A.G. 1318 with Adapter V.A.G. 1318/6 and Adapter V.A.G. 1318/7.

-

Remote control V.A.G 1348/3 A with adapter cable V.A.G 1348/3-3

Test requirements

-

Fuel Pump (FP) Control Module J538 OK; check.

-

The fuel filter OK.

-

The parking brake engaged.

-

Battery voltage at least 12.5 V.

-

The selector lever of automatic transmission in position "P" or "N".

-

All electrical consumers switched off (radiator fan must NOT run during test).

-

A/C switched off.

-

The fuel tank at least 1 / 4 filled.

-

The ignition switched off.

Checking system pressure

-

Remove the rear seat bench.

-

Remove the cover for the right locking flange - arrows -.

Fuel Pressure and Residual Pressure Before High Pressure Pump, Checking|Page 4046 > < Turbo Fuel Injection and Ignition|Page 4043