A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
High Pressure Sensor / Switch: Service and Repair
High Pressure Sensor G65, Removing And Installing
-
Remove front bumper.
-
Disconnect connector - B -.
-
Remove High Pressure Sensor G65 -C -, tightening torque: 5 Nm.
-
Replace O-ring - A - (10.8 mm; 1.8 mm).
NOTE:
-
The cooling output cannot be checked with the High Pressure Sensor G65 removed; the operating and display module, Climatronic Control
Module J255 does not switch on the compressor.
-
The refrigerant circuit remains closed, "connection with valve".
-
Checking operation of High Pressure Sensor G65 and signal supplied and.