audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Low Beam Headlamp Bulb - M29 / M31, Replacing|Page 15412 > < How to Find Wiring Diagrams|Page 15407
Page 1
background image

Headlamp Bulb: Service and Repair
Low Beam Headlamp Bulb - M29 / M31, Replacing

Low Beam Headlamp Bulb - M29 / M31, Replacing - Through 10.04

Removing

-

Turn light switch to position "O".

CAUTION:
-

Switch off all electrical consumers.

-

Switch ignition off and remove ignition key.

Left headlamp:

-

Remove headlamp.

Right headlamp - vehicles with 1.8L 4-cylinder Turbo engine:

-

Preparation.

Right headlamp - vehicles with 3.0L 6-cylinder engine:

-

Preparation.

Both sides, continued

-

Release retaining clip - arrow - and detach housing cover for low beam from headlamp housing.

-

Disconnect electrical connection - 2 - at low beam bulb.

-

Disengage retaining clip -1 - and remove bulb - 3 - from housing.

Installing

Install in reverse order of removal, noting the following:

CAUTION:

-

Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the
bulb during operation can cause the glass to cloud over.

-

When installing housing cover, ensure proper seating. Water intrusion will damage headlamp.

-

Insert bulb and secure with retaining clip.

Low Beam Headlamp Bulb - M29 / M31, Replacing|Page 15412 > < How to Find Wiring Diagrams|Page 15407