A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
-
Disconnect electrical harness connector - 3 - to Charge Air Pressure Sensor G31.
CAUTION: The air conditioning refrigerant circuit must not be opened.
-
Remove refrigerant line - 4 - from bracket.
-
Remove hose clamps - 1 - and - 2 - and disconnect air guide hoses.
-
Remove charge air cooler upward and out.
Installing
Installation is in reverse order of removal, note the following:
NOTE:
-
Hose connections and charge air system hoses must be free of oil and grease before installing.
-
Secure all hose connections using hose clamps appropriate for the model type.
-
Install headlights.
-
Install front bumper cover.
-
Check headlight adjustment.
Torque specifications
Hose clamps 13 mm wide
5.5 Nm