A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
/Page-3445002.png)
-
Use screwdriver to pry off retaining strap - arrows -.
-
Release connector locks tabs - arrows - and disconnect electrical connections - 1 - and - 2 - for Motronic Engine Control Module (ECM) J220
(where applicable).
-
Where applicable, release retaining clip for transmission control module.
-
Release connector lock - arrow - and disconnect from transmission control module.
-
Disconnect electrical connections - 2 - at rear of connector console.
-
Remove wire - 1 -.
