A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
/Page-2900005.png)
-
If line-hose assembly was disconnected at slave cylinder, the clutch system has to be bled after installing slave cylinder.
-
Install selector shaft lever and tighten nut - arrow -.
-
Bolt drive axle (left-side) to flange shaft.
Vehicles with 6-cylinder engine:
-
Screw heat shield for drive axle (left-side) onto transmission.
-
Install exhaust system and perform stress-free alignment.
Tightening Torque
