A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
/Page-2902001.png)
Clutch Pedal Assembly: Service and Repair
Clutch Mechanism, Servicing
Clutch mechanism, servicing, 01E, 6 Spd. M/T AWD
CAUTION: Before beginning repairs on the electrical system:
^
Obtain the anti-theft radio security code.
^
Switch the ignition off.
^
Disconnect the battery Ground (GND) strap.
^
On vehicles equipped with Audi Telematics by OnStar, switch-off the emergency (back-up) battery for the Telematic/Telephone Control Module
prior to disconnecting vehicle battery.
^
After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to
Owners Manual.
^
After reconnecting vehicle battery on vehicles equipped with Audi Telematics by OnStar, switch-on the emergency (back-up) battery for the
Telematic/Telephone Control Module.
Clutch mechanism, servicing
See Caution before beginning repairs on the electrical system.
Notes:
^
Disconnect battery Ground strap with the ignition switched off.
^
Lubricate all bearings and contact surfaces with polycarbamide grease G 052 142 A2.
^
Before working on pedal cluster, remove cover below dash panel:
^
Ensure that no brake fluid escapes into the footwell, plenum chamber or onto the transmission below. If this does happen, clean the affected areas
thoroughly.
^
When performing work in the footwell, put cloths on the carpet to protect it from possible brake fluid spills.
