A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
12 - Bracket
^
For hose/pipe assembly
^
Fastened together to transmission with slave cylinder
^
Installing go to Fig. 7
^
Bolt onto transmission with clutch slave cylinder
13 - Push rod
^
Lubricate end of push rod with copper grease, e.g. Z 381 351 TE
Fig. 1 Removing shaft seal for input shaft
-
Lever out seal carefully with a screwdriver.
Note: Do not damage bearing surface on input shaft for shaft seal