A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
^
Pressing out
^
Pulling off inner race
^
Stepped version
^
Contact surface between wheel hub/brake disc and tapped holes must be free from paint and dirt
^
Lightweight wheel hub
Removing
-
Remove wheel trim; pull trim cap off light-alloy wheels, (using puller in vehicle tool kit).
CAUTION: Remove hex bolt securing drive axle (loosen only when vehicle is standing on wheels - risk of accident).
-
Remove wheel.
-
Secure brake disc with wheel bolt.
-
Remove ABS speed sensor wiring from bracket on wheel bearing housing.
Vehicles with HP-2 brake caliper
-
Remove hex bolt - 2 - and detach brake line bracket.
-
Remove bolts - 1 - for brake caliper and remove brake caliper.
-
Re-attach brake line bracket. Insert hex bolt - 2 - and tighten.
-
Fasten brake caliper to the body so that the weight of the brake caliper does not bend or damage brake line.
Continued for all vehicles
-
Detach brake caliper and fasten to body so that weight of brake caliper does not bend or damage brake hose or brake line.
-
Remove bolt - 5 - for ABS speed sensor.
-
Remove brake disc.