audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Flanged Shaft Seals, Replacing|Page 8629 > < 01E, 6 SPD. M/T AWD|Page 8623
Page 1
background image

Seals and Gaskets: Service and Repair
Flanged Shaft Seals, Replacing

Flanged shaft seals, replacing, 01E, 6 Spd. M/T AWD

Special tools and equipment

VW 681 Seal extractor

2062 Driver

^

Container

Removing

^

Transmission installed

-

Remove shield, if installed, from underneath transmission.

When replacing left seal:
-

If necessary, partially remove the front part of the exhaust system.

Continuation for both seals:
-

Remove splash plate, if installed, above drive axles (arrows).

-

Detach drive axles -1- from flanged shafts, and tie up as high as possible; do not damage surface protection.

-

Place drip tray underneath.

-

Unscrew flanged shaft securing bolt; for this purpose, screw two bolts into the flange and counterhold the flanged shaft using a tire lever.

-

Pull out flanged shaft.

Flanged Shaft Seals, Replacing|Page 8629 > < 01E, 6 SPD. M/T AWD|Page 8623