A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
CAUTION!
Before -LOOSENING- subframe screws, secure vehicle against tipping over (e.g. load luggage compartment with approximately 50 kg).
-
Place the (V.A.G 1383 A) with the (V.A.G 1359/2) under the subframe and secure it using the (T10038 ).
-
Support the rear final drive - 1 - using a suitable wood block - 2 -.
-
Support front of subframe with a suitable wood block - 4 - under crossmember - 3 -.
-
Secure the subframe on the (V.A.G 1383 A) using the (T10038).
-
Secure the (T10038) under the drive axle and around the subframe and guide it behind the rear final drive.
-
Route the (T10038) under the (V.A.G 1359/2 ) and tighten it.
-
Remove the left and right bolts - 1 - and - 2 -.