A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
-
Remove the cover with upholstery from the seat pan.
Installation
CAUTION!
‹› Follow the safety precautions for pyrotechnic components. Refer to => [ Restraint System Components Safety Precautions ] See:
Restraint Systems/Service Precautions.
‹› Before handling pyrotechnic components (for example, connecting the electrical connector), the person handling it must "discharge
static electricity". This can be done by touching door striker, for example.
Installation is performed in reverse order of removal, noting the following:
‹› Ensure that electrical connections are pushed in as far as stop and engage with a click.
CAUTION!
Ignition must be on when connecting battery. If pyrotechnic components (for example, airbag, belt tensioner) are not repaired correctly,
they may deploy unintentionally after connecting battery. There must not be anyone inside the vehicle when connecting the battery.
-
Disconnect the battery ground wire with the ignition switched on.
‹› If Airbag Malfunction Indicator Lamp (MIL) (K75) indicates a fault after installation, DTC memory must be checked, deleted and checked again.