A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
‹› In foam in upholstery
6
Retaining Channel
‹› Sewn into cover
‹› For engaging the cover on the rear of the seat pan upper frame
7
LATCH Child Seat Anchors
‹› Optional equipment: passenger seat only
‹› Assembly overview, refer to => [ Front LATCH Child Seat Anchorages Assembly Overview ] See: Restraint Systems/Seat Belt Systems/Child
Restraint/Child Seat Tether Attachment/Description and Operation
‹› Removing and Installing, refer to => [ Front LATCH Child Seat Anchorages ] See: Restraint Systems/Seat Belt Systems/Child Restraint/Child
Seat Tether Attachment/Service and Repair
8
Cover Strap
‹› with clamping profile
‹› clamping profile sewn into cover
‹› for engaging the cover on side of the seat pan upper frame
9
Retaining Bracket
‹› For sill side trim
Manual Standard Front Seats
‹› Removing and Installing, refer to => [ Sill Side Trim Retaining Bracket ] See: Service and Repair/Removal and Replacement/Manual Standard
Front Seats (retaining bracket not shown in the illustration)
Power Standard Front Seat
‹› Removing and Installing, refer to => [ Sill Side Trim Retaining Bracket ] See: Service and Repair/Overhaul/Power Standard Front Seat with or
without Memory Function
10
Cushion
‹› with wire placed in foam upholstery (only with leather covers)
11
Cushion Clamp
‹› Only with leather covers
‹› For securing cover to upholstery
‹› Replace after each disassembly
‹› Install in same location as before removal
12
Retaining Channel
‹› Sewn into cover
‹› For engaging the cover on the front and side of the seat pan upper frame.
13
Cover
‹› With padding
‹› Removing and Installing, refer to => [ Cover and Upholstery, Seat Pan without Seat Cushion Extension ] See: Service and