A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Trunk / Liftgate Weatherstrip: Service and Repair
Rear Lid, Avant
Rear Lid Seal
1
Rear Lid Seal
‹› Removal:
-
Remove the rear lid end piece trim panel.
-
Secure the rear lid from falling down and disconnect the gas-filled strut on the body side from the left and right ball studs.
-
Remove the seal from the flange on the body all the way around.
-
When installing, align the seal to the upper marking- arrow - and then press it onto the flange all the way around.
2
Rear Lid