A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Seat Heater: Service and Repair
Seat Heating Element, Standard Seat
Seat Heating Element, Standard Seat
Removing
-
Remove cover and upholstery from seat pan. Refer to => [ Cover and Upholstery, Seat Pan without Seat Cushion Extension ].
-
Disconnect cover from upholstery. Refer to => [ Cover and Padding, Seat Pan without Seat Cushion Extension Separating
and Assembling ] See: Service and Repair/Overhaul/Front Seat Covers and Upholstery Assembly Overview.
-
Cut the wire - 3 - off directly at the old heating element - 2 -.
‹› The old seat heating element remains on the upholstery - 1 - and the new seat heating element is bonded over it.
‹› Ignore - items A through E - and - arrows -.
Installation
-
Align the new heating element on upholstery.
CAUTION!
‹› Make sure the new seat heating element is affixed to the old heating element.
‹› Remove the protective films in the bonding sequence for the heating element area.
‹› When removing the protective film, make sure the heating element is not damaged and that it is attached without wrinkles.
-
Bond the individual areas of the heating element in the sequence - A, B, C and D -.