A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
-
Pull securing bracket in direction of - arrow - and remove connector.
‹› Ensure no brake fluid enters control module connector housing. This could lead to corrosion of the contacts and thereby cause the system to fail.
‹› A contaminated connector housing must be carefully cleaned with compressed air.
-
To protect against escaping brake fluid, place a lint-free cloth in the area under the control module J104 and hydraulic unit N55.
-
Mark brake lines for installation later.
CAUTION!
Do not bend or kink the brake lines.
-
Remove brake lines from ABS hydraulic unit N55 and brake master cylinder.
-
Remove remaining brake lines - arrows - from ABS hydraulic unit N55.