A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
/Page-1480004.png)
‹› Use an extension to tighten the lower bolt - 16 -. An extension is not needed to tight the upper bolt - 17 -. Slightly move the wheel housing liner
away.
-
Install brake hose and electrical wire into the bracket on the stub axle carrier.
‹› Make sure the brake hose is correctly installed and secured inside the bracket on the stub axle carrier. So that the brake hose does not come out of
the bracket on its own.
-
Install wheels.
-
Lower vehicle.
-
Switch on ignition
Display on vehicle diagnostic, test and information system :
