A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Radiator Cooling Fan Control Module: Service and Repair
Coolant Fan Control Module
Removing
‹› During installation, all cable ties must be re-installed at the same location.
-
Remove noise insulation.
-
Remove the coolant fan electrical connector - 1 - form the bracket and disconnect it by sliding the retainer back - arrow - and pressing the release
down.
-
Free up the electrical wiring harness to the radiator fan control module.
-
Disconnect electrical connectors - 2 - and - 3 -.
-
Remove bolt - arrow - and coolant fan control module - 1 -.
Installing
Installation is in reverse order of removal, note the following:
‹› Tightening specifications. Refer to => [ Radiator and Coolant Fan Assembly Overview ] See: Radiator/Service and Repair/Radiator and Coolant
Fan Assembly Overview.
-
Install front noise insulation.