A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
-
Remove A/C compressor bolts - arrows -.
CAUTION!
Risk of damaging coolant lines and hoses.
‹› Do not stretch, kink or bend coolant lines and hoses.
-
Tie up the compressor with the refrigerant lines attached to the longitudinal member.
‹› The power steering pump hydraulic lines remain connected.
-
Remove bolts - 1 - from the front through the belt pulley and then remove the bolt - 2 - from the back.
‹› The power steering pump is shown in the illustration without the belt pulley and without the hydraulic lines.
-
Remove the power steering pump with the hydraulic lines connected on the longitudinal member.
-
Loosen the oil filter - arrow - using the Hazet Oil Filter Wrench (2171-1) the Oil Filter Wrench (3417) and then remove the filter.
-
Remove bolt - arrow - for the oil dipstick guide tube.