A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
‹› No replacement part, part of the valve unit delivery package
6
O-ring
‹› No replacement part, part of the valve unit delivery package
7
Valve unit
‹› With O-rings
8
Oil filter element
‹› Remove and install using Oil Filter Wrench (3417 )
9
Seal
‹› Replace
10
Reduced Oil Pressure Switch (F378)
‹› brown insulation
‹› Removing and installing => [ Reduced Oil Pressure Switch ] See: Oil Pressure Sensor/Service and Repair/Reduced Oil Pressure Switch
‹› checking
‹› 20 Nm
11
Bolt
‹› 15 Nm
12
Connection
13
Seal
‹› Replace
‹› Coat with coolant additive.
14
Engine oil cooler
‹› See note, refer to => [ Oil Pan and Oil Pump ] See: Oil Pan/Service Precautions
‹› Ensure sufficient clearance to surrounding components
‹› Removing and installing, refer to => [ Engine Oil Cooler ] See: Engine Oil Cooler
15
Gasket
‹› Replace
16
Bolt
‹› Tightening order, refer to => [ Accessory assembly bracket tightening sequence ] See: Drive Belts, Mounts, Brackets and Accessories/Drive
Belt/Service and Repair/Ribbed Belt Drive and Accessory Assembly Bracket Assembly Overview