A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
‹› The notch on the vibration damper must line up with the arrow marking on the timing chain lower cover.
-
Remove vibration damper bolt using Counter Hold Tool (T10355).
‹› To avoid damaging the splines, only install the vibration damper bolt with the Thrust Piece (T10368).
-
Install the vibration damper bolt and Thrust Piece (T10368) again.
CAUTION!
The engine could be destroyed.
‹› In order not to change the valve timing, the crankshaft must not be moved out of the "OT" position when the vibration damper bolt is
removed.
-
Remove the idler roller - 1 -.
-
Remove the bolts - arrows - and remove the oil dipstick guide tube from the timing chain cover.