A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
/Page-2186002.png)
-
Remove the control motor and its bracket
-
Remove the screws - G - and separate the control motor from the bracket - H -.
-
Loosen the toothed segment - A - from the control motor shaft - B -.
Installing
Installation is carried out in the reverse order, when doing this note the following.
-
Install the control motor - B - in the bracket - D -.
-
Install the screws - G -.
-
Mount the toothed segment - A - on to the control motor shaft - B - as shown in the illustration.