A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
-
When installing drive plate, coat rubber element - D - lightly e.g. with tire mounting paste or soap solution (as sliding compound).
-
Insert rubber element - D - in belt pulley - B - according to illustration.
-
Press the drive plate rubber element - C - far enough into the pulley - E - until the drive plate - C - until it contacts A/C compressor shaft - B -.
-
Attach the drive plate - C - to the compressor shaft - B - by turning it contrary to the direction of the arrow - arrow -.
-
Hold the compressor driveshaft - B - for example, with a standard Allen wrench (7 mm) and turn the drive plate - C - together with the pulley - E -
contrary to the direction of the arrow - arrow - (torque 30 Nm).