A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
-
Unlock the retaining clamps - 1 - in - arrow direction A - and remove the condenser - 2 - upward and out of the brackets on the radiator - arrows
B -.
‹› In the illustration, with the bumper cover removed.
Installing
Installation is done is reverse order, observe the following:
‹› The removed condenser contains refrigerant oil that must be returned to the refrigerant circuit with the new condenser. Refer to A/C system -
Refrigerant R134a.
-
Install the refrigerant lines to the condenser. Refer to => [ Disconnecting and Connecting Refrigerant Lines from Condenser ] See: Compressor
HVAC/Service and Repair.
Vehicles with a power steering oil cooler:
-
Install the power steering oil cooler cooling coil.
All:
-
Install the cover on the lock carrier.
-
Evacuate and fill the refrigerant circuit. Refer to A/C System with Refrigerant R134a.
-
Install the remaining components.
-
Check DTC memory of A/C control head Climatronic Control Module (J255) and erase any displayed malfunction if necessary. Refer to Vehicle
Diagnosis, Testing and Information System VAS 5051 in "Guided Fault Finding" function.
-
Operate the A/C system after filling the refrigerant circuit. Refer to=> [ Operating A/C System after Filling Refrigerant Circuit ] See: Description
and Operation/A/C Refrigerant System.
‹› Note the information regarding operating the A/C system after filling.