A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
-
Pull the ignition coil about 30 mm out of the spark plug shaft using a puller (T40039).
-
Release electrical connectors and remove them evenly from ignition coils.
-
Remove spark plugs with Spark Plug Removal Tool 3122 B.
-
Install new spark plugs.
Removing the ignition coils from cylinder bank 2:
-
Remove the coolant reservoir - arrow - and disconnect the electrical connector on the engine coolant level (ECL) warning switch (F66) on the
bottom of the coolant reservoir.