A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
-
Remove electrical wire - 1 - on the 4-pin relay/fuse carrier.
-
Release retaining spring - arrow A - and tilt the relay/fuse carrier - 3 - out of the mount - arrow B -.
-
On the rear side, remove the electrical wire - 2 - on the 4-pin relay/fuse carrier.
-
Unclip fuse holder on relay carrier.
-
Remove relay and control modules.
-
Release retaining clips - arrows - and press relay carrier - 2 - back and out of the bracket - 1 -.
‹› The exact assignment of the 4-pin relay/fuse carrier with threaded connection can be found in the applicable wiring diagram.
Installing
‹› Tightening specification => [ 4-pin relay/fuse panel with threaded connection,
tightening specifications ] See: Wire Junction, Instrument Panel Relay/Fuse Panel and Luggage Compartment Relay/Fuse Panel Assembly Overview.