A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Information Bus: Service and Repair
Interior CAN Cut-Off Connector Mount
Interior CAN Cut-Off Connector Mount
Removing
-
Disengage left A-pillar connector station => [ Driver Side A-Pillar 6-Pin Connector Station ] See: Maintenance/Fuses and Circuit Breakers/Fuse
Block/Service and Repair/Driver Side A-Pillar 6-Pin Connector Station.
-
Remove interior CAN cut-off connector (T46i) => [ Interior CAN Cut-Off Connector ] See: Interior CAN Cut-Off Connector.
-
Slide the locking lever - 2 - into the "open " position - arrow -.
-
Press release - 1 - and press the mount - 3 - for the interior CAN cut-off connector (T46i ) back.
Installing
Install in reverse order of removal, observing the following:
-
Slide locking lever - 1 - on the mount into the " closed" position.
‹› Both markings - arrows - must align.
-
Install the interior CAN cut-off connector (T46i ) => [ Interior CAN Cut-Off Connector ] See: Interior CAN Cut-Off Connector.
-
Install the left A-pillar connector station => [ Driver Side A-Pillar 6-Pin Connector Station ] See: Maintenance/Fuses and Circuit Breakers/Fuse