A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
/Page-999001.png)
Information Bus: Service and Repair
Instrument Panel CAN Cut-Off Connector Mount
Instrument Panel CAN Cut-Off Connector Mount
Removing
-
Remove instrument panel CAN cut-off connector ( T46s) => [ Instrument Panel CAN Cut-Off Connector ] See: Instrument Panel CAN Cut-Off
Connector.
-
Remove glove compartment.
-
Slide locking lever - 2 - into the "open" position - arrow -.
-
Press release - 1 - and press mount - 3 - for the instrument panel CAN cut-off connector (T46s) back.
Installing
Install in reverse order of removal, observing the following:
-
Slide locking lever - 1 - on the mount into the " closed" position.
‹› Both markings - arrows - must align.
-
Install the instrument panel CAN cut-off connector (T46s) => [ Instrument Panel CAN Cut-Off Connector ] See: Instrument Panel CAN Cut-Off
Connector.
